Grill assembly – Sure Heat 2008 Surefire SF308LP User Manual

Page 11

Advertising
background image

Grill Assembly

a. Lay the Side Shelf Left Assembly (6A) on its side. Use

one (1) M6 x 10 phillips pan head screw to attach one
of the Handle Ends (6B) to the front of the shelf.

Note: Be careful not to scratch the side of the shelf.

b. Slide one end of the Towel Bar (6C) into the installed

handle end. Attach the second handle end using
the M6 x 10 phillips head screw while holding the
assembly in place.

c. Loosen the four (4) 5/16-24 Hex Head screws on the

left side of the grill as shown.

Note: The screws were pre-installed on the grill head

assembly.

d. Attach the left shelf by inserting the four screws on the

side of the grill head into the holes on the left shelf.

e. Tighten the screws with a wrench.

f. Install one self-tapping screw into the bottom front

slotted hole of the shelf. This will permanently lock the
shelf in place.

STEP SIX

6A

6B

6C

Close view for Step 6f

11

6A

Advertising