Sure Heat FS87PHLP Patio Heater - Manual (Page 8)

Assembly Process
8
Line up holes in Wheel Bracket with corresponding holes in base. Insert 2 Medium bolts through
holes and finger tighten the 2 Large Flange Nuts.
Be sure that the Wheel Assembly is parallel to the base, and fully tighten bolts.
Wheel Assembly
2 Medium bolts /2 Large Flange Nuts
Slip 4 Large Screws though holes of Base.
Lay Bucket inside of Base and screw on large nut. Tighten with Phillips screwdriver.
To improve stability, the bucket should be filled with sand.
Bucket
4 Large Screws / 4 Large Nuts
Step 2- Attach Bucket to Base
Step 1 - Attach Wheel Assembly to Base