SUUNTO Core - Manual (Page 9)

4 GETTING STARTED
Basic settings
Press any button and your Suunto Core will activate. You are then prompted
to set the language, units (imperial or metric), time and date. Use the upper
right [+] button and lower right [- Light] button to change the settings. Accept
and move to the next menu item by pressing the right middle [Mode] button.
You can always return to the preceding menu item by pressing the lower left
[View] button. When the settings are set as you want, you can start using the
basic time features of your Suunto Core.
NOTE: You need to set the altimeter, barometer and compass to get correct
readings. Please refer to the User Guide for detailed information on setting these
properly.
Modes
Your Suunto Core has three modes: TIME , ALTI & BARO and COMPASS . These
modes are explained in detail in the User Guide. The enabled mode is indicated
by a rectangle around the mode name. You switch between the main modes
with the right middle [Mode] button. Try it!
9
en