Ac water contacts – SUUNTO D4i User Manual
Page 30
Advertising
4.3. AC water contacts
The water and data transfer contact is located on the side of the case. When sub-
merged, the water contact poles are connected by the conductivity of the water and
the “AC” symbol appears on the display. The AC text is shown until the water contact
deactivates.
AC APPEARS IN THE TOP RIGHT
CORNER OF THE DISPLAY, WHEN THE DIVE
COMPUTER IS IN CONTACT WITH WATER.
THIS ALSO ACTIVATES THE DIVE MODE.
Contamination or dirt on the water contact may prevent this automatic activation.
Therefore, it is important that the water contact is kept clean. The contact can be
cleaned with fresh water and a soft brush, for example a tooth brush.
31
Advertising