SUUNTO Elementum Terra - Manual (Page 18)

1. In TIME mode, rotate [A] downwards to enter MEMORY . The latest altitude
log is shown first.
2. Rotate [A] downwards to browse the logs from latest to oldest. Rotate [A]
upwards to browse the logs from oldest to latest.
3. Press [A] to switch between the first and second view of the log.
4. Press [B] or [C] to exit
MEMORY .
The information on your altitude logs is stored in MEMORY . Each log has its own
memory slot that is shown as a segment on the outer rim on the display. The
log information is divided into two views. In the first view (picture 2), the
following information is shown:
●
maximum altitude (first row)
● start time (second row)
● start date (bottom row)
The second view (picture 3 and 4) shows the following information:
●
cumulative descent (first row)
● cumulative ascent (second row)
● duration (bottom row)
NOTE: MEMORY stores up to 8 logs. After MEMORY is full, each new log replaces
the oldest log.
12