CTX M730V - Manual (Page 10)

♦♦♦
8
English
1. Auto-Tune (It is disabled in DVI
Mode)
1. Press "
↵ ↵ ↵ ↵ ↵
" to open the OSD main menu.
2. Use the " ∇ " and " ∆ " arrows to move through the displayed functions.
3. Press "
↵ ↵ ↵ ↵ ↵ " to confirm your selected function.
When selecting “Auto-Tune”, wait for a
few seconds, the monitor will auto-ad-
just Clock, Phase, H-position and V-po-
sition to their optimal level.
CONTROLS AND ADJUSTMENTS
On Screen Display (OSD) Main menu
ADVANCED AUTO TUNE PATTERN
PROGRAM USAGE GUIDE
• As some VGA Cards do not match the
VESA standard they cannot output 0.7
V p-p VESA standard. Therefore, you
need the "ADVANCED AUTO TUNE
PATTERN PROGRAM" to modify the
parameters of the monitor to match the
different output level of the VGA card.
• AUTO_TUNE.exe is used for Windows
the display mode adjustment. It will
adjust the VGA input level and video
quality to optimum.
• DOS_TUNE.exe is used for 720x400
70Hz & 640x 350 70Hz under DOS
mode adjustment. It will adjust the
video quality to optimum.
• For the adjustment, please execute the
program, then select the "Auto Tune"
function in the OSD menu, to get the
optimal picture.
When the main screen starts, there are following functions to choose