SUUNTO Vyper Air - Manual (Page 48)

ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.7.5. Setting the sample rate
The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
You can set the dive profile sample rate to 1, 10, 20, 30, or 60 seconds. The factory
default setting is 20 seconds.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.7.6. Setting the Safety Stops/deep stops
In the AIR mode in the Deep Stops setting mode, the Deep stops can be set “ON” or
“OFF” depending on whether the Deep stops are used or not.
48