Chicago Electric SCREWING TOOL 95065 - Manual (Page 3)

SKU 95065 For technical questions, please call 1-800-444-3353 Page 3
When operating a power tool 6.
outside, use an outdoor extension
cord marked “W-A” or “W”. These
extension cords are rated for outdoor
use, and reduce the risk of electric
shock.
personal Safety
Stay alert. Watch what you are 1.
doing, and use common sense
when operating a power tool. Do not
use a power tool while tired or under
the influence of drugs, alcohol, or
medication. A moment of inattention
while operating power tools may result
in serious personal injury.
Dress properly. 2. Do not wear loose
clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves
away from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
Avoid accidental starting. 3. Be sure
the Power Switch is off before plugging
in. Carrying power tools with your
finger on the Power Switch, or plugging
in power tools with the Power Switch
on, invites accidents.
Remove adjusting keys or wrenches 4.
before turning the power tool on. A
wrench or a key that is left attached to
a rotating part of the power tool may
result in personal injury.
Do not overreach. 5. Keep proper
footing and balance at all times. Proper
footing and balance enables better
control of the power tool in unexpected
situations.
use safety equipment. 6. Always wear
eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing
protection must be used for appropriate
conditions.
Tool use and Care
use clamps (not included) or other 1.
practical ways to secure and support
the workpiece to a stable platform.
Holding the work by hand or against
your body is unstable and may lead to
loss of control.
Do not force the tool. 2. Use the correct
tool for your application. The correct
tool will do the job better and safer at
the rate for which it is designed.
Do not use the power tool if the 3.
Trigger Switch does not turn it on or
off. Any tool that cannot be controlled
with the Trigger Switch is dangerous
and must be replaced.
Disconnect the Charger Adapter from 4.
the power source before making any
adjustments, changing accessories,
or storing the tool. Such preventive
safety measures reduce the risk of
starting the tool accidentally.
Store idle tools out of reach of 5.
children and other untrained
persons. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. 6. Keep
cutting tools sharp and clean. Properly
maintained tools with a sharp cutting
edge are less likely to bind and
are easier to control. Do not use a
damaged tool. Tag damaged tools “Do
not use” until repaired.
Check for misalignment or binding of 7.
moving parts, breakage of parts, and
any other condition that may affect
the tool’s operation. If damaged,
have the tool serviced before using.
Many accidents are caused by poorly
maintained tools.
use only accessories that are 8.
recommended by the manufacturer
for your model. Accessories that may
be suitable for one tool may become
hazardous when used on another tool.