CDA DC730 User Manual
Page 31
Advertising
31
IMPORTANT:
– To avoid damage to the lower trim please note the following instructions.
– The lower trim is designed to allow for good air circulation and the correct opening of the oven door.
– To ensure the trim is not damaged due to the appliance being placed on the floor, the appliance should
be suitably supported as in below illustrations.
– After installation the appliance door should be slowly opened to ensure no damage has occurred.
– No responsibility for lower trim damage will be accepted if these instructions have not been
followed.
OVEN DOOR
LOWER TRIM
AIR FLOW
Fig. 43
Air Flow
Oven Door
Lower Trim
Advertising