Candle-lite DB2 - Manual (Page 93)

Using OMEGAMON II for DB2 with !DB/EXPLAIN 93
Using the OMEGAMON II for DB2 Callable Interface
Using the OMEGAMON II for DB2 Callable Interface
The callable interface feature of OMEGAMON II for DB2 lets you make direct calls to
!DB/EXPLAIN without first having to access TSO.
Before using this feature, you should do the following:
1. Customize the Classic started task.
2. Set up !DB/EXPLAIN.
3. Set up the CUA options.
4. Set up the OMEGAMON II for DB2/EXPLAIN options.
Customizing the Classic started task to implement the OMEGAMON II for DB2 interface
Use the following procedure to customize the Classic started task.
Note: You may have already completed this procedure during the installation of
OMEGAMON II for DB2.
Step Action
1 From the Configure OMEGAMON II for DB2 for Runtime Environment Default menu,
select option 2, Realtime Monitor Interfaces.
Result: The system displays the Started Task and VTAM Information Panel.
----- CONFIGURE OMEGAMON II FOR DB2 FOR RUNTIME ENVIRONMENT DEFAULT ----
OPTION ===>
Select the following options to configure OMEGAMON II for DB2.
You may type ALL to update the entire configuration or you may update
specific sets of values by making selections from the list below.
1 DB2 Subsystem Information
2 Realtime Monitor Interfaces
3 Event Collection Manager and ATF configuration
4 Historical Components
F1=Help F3=End