4 receiving encrypted channels, 5 volume control – TechniSat DIGIT ISIO S User Manual

Page 25

Advertising
background image

8.3.5 Returning to last channel selected

>

Press the Back button on the remote control to return to the last channel selected.

>

Press the button again to return to the channel you were previously watching.

8.3.6 TV/Radio switchover

>

You can use the TV/Radio button to switch between TV and radio mode.

The device switches to the last radio channel listened to.
Alternatively you can also switch between TV and radio operation.

8.3.7 Infobox

An Infobox appears on the screen for the period set in the Special Functions menu

every time you change channels.

This Infobox displays the location and name of the selected channel, the title of the current

programme and the currently active channel list.

The progress bars are coloured yellow according to the amount of transmission time

already expired for the current programme. If the beginning of the progress bar is

coloured red the transmission started too early and if the end of the progress bar is

coloured red the current programme has overrun.

Additional programme properties are also displayed:

For example:

for teletext

for 16:9 broadcasts

for encrypted channels

for Dolby Digital broadcasts

for subtitles

for HbbTV

The current time is shown in the right-hand upper corner of the screen.

8.4 Receiving encrypted channels

>

Insert the CONAX smartcard into the card slot in the integrated card reader. (gold-

coloured chip facing down, and in the direction of insertion).

Or
>

Insert a CI / CI+ module into the slot.

>

Insert the smartcard into the CI / CI+ module card slot. Ensure that the gold-coloured chip

on the smartcard is facing upwards, in the direction in which the card is inserted.

8.5 Volume control

You have the option of adjusting the volume on your digital receiver. This facilitates

operation of the receiver, as it means you can access all the major functions on a single

remote control, and will only rarely have to resort to using the remote control for the TV.
>

To adjust the volume of your TV, press Volume + to increase the volume, and

Volume - to decrease it.

25

Advertising