TechniSat DigitRadio 300 - Manual (Page 16)

16
Audio Settings
>Open the menu by pressing the MENU.
>Push TUNE up/down until you have reached the point audio setting.
>Now press SELECT.
>Push TUNE up/down to choose whether the sound should be played exclusively in
mono (mono only) or, if available, also in stereo (Stereo Audio).
If the sound is reproduced noisy, so the SELECTion of mono only lead to a reduction
of the noise.
Language
>Open the menu by pressing the MENU.
>Push TUNE up/down until you have reached the point Language / SELECT.
>Now press SELECT.
>Rotate TUNE up/down to choose the desired operating language (German, English,
Italiano or Francais).
>Confirm by pressing SELECT.
Factory setting
>Open the menu by pressing the MENU.
>Push TUNE up/down until you have reached the point factory settings.