TechniSat SATMAN 45 Manual - Manual (Page 7)

7 Multytenne
EN
FR
IT
NL
CZ
PL
Sealing the LNB connection
Dear customer,
in order to prevent any moisture from entering the Multytenne LNB, please use the self-sealing duct tape
supplied to insulate and seal the LNB connection.
1. First remove the foil from the sealing tape.
2. Apply one end of the sealing tape approx. 1-2 cm below the F-connector.
3. Now stretch the sealing tape as much as possible, and wrap it around the co-axial cable and the
F-connector, with overlapping edges. Stretching the sealing tape ensures that the layers of tape
form a sealed bond at the overlapping edges.
4. The LNB is now insulated and sealed, so that no water or humidity can penetrate.