TechniSat SATMAN 45 Mounting instruction - Manual (Page 8)

8
E
N
Dear Customer
Thank you for choosing a quality product from TechniSat. To ensure that the quality of the
product remains unchanged over years of use, the mounting and dish are made from alumi-
nium.
The dish is designed to receive digital signals from the ASTRA satellites. To ensure optimal
reception after installation, please read the installation instructions carefully before installing.
Before starting the installation, check that all of the parts for the external unit are present.
Parts supplied
(see Figures 1 and 2)
1
A
A
2
3
4
B
C
5 6
D
Screws for setting the
angle of elevation
Figure 1 Figure 2
Item Article
1 1 AZ/EL bracket with LNB clamp and swivel profile
2 1 Dish
3 1 Connector rod
4
1 Wall bracket*:
5 1 LNB
6 1 LNB clamp, 1 M6 x 40 bolt, 1 M6 x 16 bolt
A 4 M6 x 15 bolts, 4 M6 nuts, 4 washers
10m coaxial cable with F-connectors (only included with complete sets that
come with the receiver)
“short” “medium” “long” or or
* Contents depend on package selected