TeeJet LH 500 - Manual (Page 3)

LH A GRO 3
FITTING THE LH 500
1
2
3
4
5 6
7
8
10
11
12
13
14
16
9
15
2408-0014
1. Drill 2 x 5 mm holes with a distance of 55 mm in the machines right-hand side.
2. Fasten the bracket (pos. 2) with the supplied self-tapping screws.
3. Fasten the implement plug bracket (Pos. 11) at the rear of the machine then attach the
implement plug (Pos. 9) to the bracket.
4. Connect the power supply cable (Pos. 7) as follows:
Pin no. Description
31 0V
82 +12V
(ignition)
15/30 +12V
5. Connect the DIN-ISO plug (Pos. 8) as follows:
Pin no. Description
1 Radar
2
Forward speed (wheel tractor)
3 PTO
4
Implement signal (lift up/lift down)
5 Lift arm position
6 +12V
7 0V