Fieldpilot, Install mounting brackets on fieldpilot valve, Mount valve bracket on vehicle – TeeJet FieldPilot Install AgChem 1803 User Manual
Page 11
www.teejet.com
10
FieldPilot
®
2. INSTALL MOUNTING BRACKETS ON FIELDPILOT VALVE.
Using the bolts and nuts
(I
and
K)
attach the valve block to the bracket
(M)
so that the ribbed part of the
bracket is pointed away from the valve block.
Figure 1-3: Install the Mounting Bracket
3. MOUNT VALVE BRACKET ON VEHICLE
The valve is mounted on the rear face of the tool cabinet located on the left side of the vehicle. Hold the valve
and bracket assembly in place to ensure clearance for the hoses (which will be attached later) and to position
the valve so it does not protrude outside the clearance of the tool box. Use the position of this assembly to
choose the best place to drill a hole in the forward face of the toolbox. Drill a single hole large enough to
accept the 5/8 inch mounting bolt
(J)
, 11/16” is recommended.
Use the 5/8-11 x 1.5” bolt and Nyloc nut
(J
and
L)
to firmly attach the valve and bracket assembly to the
toolbox.
Figure 1-4: Mount Valve Bracket on Vehicle