Saving a file from hyperterminal – ThermoProbe TL2 User Manual
Page 15
Advertising
15
02/2013, JK
Saving a file from HyperTerminal:
1. From the HyperTerminal menu bar click "Transfer->Capture Text".
2. Enter the file name (if you use ".csv" Excel will recognize the file as a comma delimited file).
3. Click "Start".
4. When you are done logging, click "Transfer->Capture Text->Stop".
5. The file is saved as plain text with the data separated by commas. You can open the file in Excel or any text editor.
Advertising