ThermoWorks RT610B T-SHAPED WATERPROOF DIGITAL THERMOMETER - Manual

ThermoWorks, Inc.
Utah, U.S.A.
Ph: 801-756-7705
Fax: 801-756-8948
www.thermoworks.com
• IP66/67 Waterproof Rating
• Heavy Duty SST Probe
• Large and Clear Display
• Automatic Shut-off
• Reduced Penetration Probe Tip
Instrument Operation
Press the ON/OFF button to activate the thermometer.
The unit will turn off automatically after 10 minutes or when switched off by the user. Insert the stainless
steel probe about 2 inches (50mm) into the object to be measured. The measured temperature will be
shown on the LCD display.
To Select ˚F or ˚C
Press the ˚C/˚F button to select the desired temperature unit.
Battery Installation
Replace the battery if the LCD display becomes dim.
Loosen the two screws on the underside of the T-handle.
Replace with (1) A76 (LR44), 1.5 volt or equivalent.
Replace the battery cover and tighten the screws.
Care and Cleaning
Clean the probe immediately after each measurement to avoid cross contamination.
Do not expose the entire thermometer to temperatures over 122˚F (50˚C).
Do not use inside ovens.
Not submersible.
Technical Support
For warranty, service, and technical assistance, please contact ThermoWorks’ Technical Support
at (801) 756-7705 or email at [email protected].
Specifications
Measuring Range -58 to 392˚F (-50 to 200˚C)
Accuracy ±1.8˚F (±1˚C) over full range
Display Resolution 0.1˚
Display Reading Update 1 second
Respone Time Approximately 15 to 20 seconds in liquid
Auto Off After approximately 10 minutes
Battery 1.5 volt, type A76 (LR44) or equivelant x 1 piece (included)
Battery Life About 5,000 hours continuous operation
Water Resistance IP66/67
Probe Size 0.197 dia. x 4.9 L inches reduces to 0.137 inch dia. at tip
(5 dia. x 125 L mm reduces to 3.5 mm dia. at tip)
Operating Range 32 to 122˚F (0 to 50˚C)
RT610B
Waterproof
Digital
Thermometer
P-11-030-01-b
Follow us on:
RT610B Waterproof
Digital Thermometer
Made in China