THORENS TD 295 MK IV - Manual (Page 18)

Unpacking and set-up
Carefully take the record player and its accessories out
of the carton and check if each of the following items has
been supplied:
Loop the drive belt around the sub-platter and motor
pulley (Fig. 1). Carefully put the main platter, depression
beneath, onto the sub-platter.
Please make sure that no oil or greasy substances can
get onto the belt and the transmission area of the sub-
platter. If necessary, both parts may be cleaned with an
alcoholic dilution added to a lint-free cloth.
1 x plinth with sub-platter and tonearm
1 x Thorens drive belt
1 x platter with felt mat
1 x dust cover
1 x tonearm counterweight
1 x anti-skating weight
1 x plug-in power supply
1 x RCA phono cable with earth wire
1 x adapter for 7-inch records
Attach dust cover to the hinges at the rear side of the
plinth – Your record player is now completely mounted.
IMPORTANT: It is highly recommended to save the ship-
ping box and all packing material in case the record player
needs to be packed again for transportation. Thorens can-
not be held responsible for any damage that may occur
during transport on the ground that the record player has
not been properly packed.
Fig. 1
18