Tie Down Bunk Guides 24 - Manual

Heavy Duty Guide
On Post
Assembly Instructions
Part #86103/86441 - 48” Model
Part #86119/86440 - 60” Model
121311,a682
Tools Required:
9/16" Deep Socket, 9/16" Wrench,
Pliers and Phillips Head Screw Driver
Parts List
Description Qty
34" x 1-1/2" sq. Support Tube
2
Upper Mounting Plate 2
Lower Mounting Plate 2
3/8" x 5" Hex Head Bolt 8
3/8" Hex Nyloc Nut 8
3/8" Flat Washer 16
Description Qty
48" or 60” PVC Tube with Orange
Bullet Caps
2
Light Kit Models Include:
48" or 60” PVC Tube with Orange
Bullet Caps and LED Lights
2
Splice Connectors 2
Self Tapping Screws 2
Instructions # 15341
TIE DOWN ENGINEERING • 255 Villanova Drive SW • Atlanta, GA 30336
www.tiedown.com (404) 344-0000 Fax (404) 349-0401
15 ”
11”
Mounting position
for 3” wide tubes
Mounting position
for 2” wide tubes
Horizontal Movement 5” to 15” Vertical Movement 15” to 15” Minus Tube Height
Trailer Frame
Long Tube Side Out
Short Tube Side Out
15” max.
5”
mim.
19 ”
15”
Horizontal Movement 5” to 11” Vertical Movement 19” to 19” Minus Tube Height
Trailer Frame
11” max.
5”
mim.
2” x 4”
Trailer Frame
2” x 4”
Trailer Frame
Installing your Boat Guides: Complete Parts Assembly Diagram on Back
1. Before assembling the mounting hardware,
decide where and which set up you will want
the Guide On’s placed on your trailer.