Taking photos 1 – Cobra Digital DC360 User Manual
Page 5
4
Note: For detailed instruction on PhotoImpression and Funhouse software, please
refer to separate instructions enclosed.
If the auto installation fails, you must install them manually.
1.
Place the DRIVER DISK CD into the CD-ROM driver
2.
Enter E:\autorun.exe (If E is your CD-ROM letter)
3.
Follow the directions of the installation wizard.
Taking photos
1
Please be sure batteries installed are fresh before using the camera to take
photos.
1.
Load the batteries. Hold down the Start/Shutter Button for 5 seconds
and the camera will give out a “beep” sound indicating the camera is ON.
“
Hi
000” will display in the LCD.
2.
Use the optical viewfinder to view and frame your subject prior to taking
photograph.
3.
Hold the camera steadily, and press the shutter button to take photos.
4.
When you hear the buzzer beeps once, which indicates you have already
taken a photo, and you can go on taking photos.
5.
When the camera is fully loaded with photos, if you press Start/Shutter
button again, the buzzer will give out continuous beeps sound for alarm.
Prompt:
1.
When taking photos, the lower sound indicates the failure of shooting.
2.
Please hold camera steadily when you are taking photos.
3. The storage of light wills effort the quality of picture.