Tie Down Quik-Set Stabilization Plate - Manual

* Patent Pending
5" to 6"
This side faces away
from home
Home
Direction
Home
Direction
Part #59291
Conditions
Instructions
• The associated anchor used with this plate
must be a soil auger anchor and must be
approved by the authority having jurisdiction
and installed in accordance with the approved
installation instructions in the soil type or
range of soil types approved for the anchor.
• Minimum allowable tie angle of 40 degrees
from vertical
• Maximum tie design load of 3150 pounds
• Minimum required soil test probe torque value
of 200 inch pounds at the level of the plate
1. Install ground anchor inside skirting line at a
slight back angle of 10˚ - 15˚.
2. While anchor head is still 5" to 6" above
ground level: install Quik Set stabilization
plate around anchor shaft, referring to the
direction imprinted on the top of the plate.
3. Install ground anchor until Quik-Set plate is
fully set. Hammering may be required at the
corners to insure plate being fully driven.
4. Install strap(s) to anchor head and pretension
according to approved methods. Maximum anchor
load in conjunction with the "Quik-Set" device is
4725 lbs. (ultimate).
10˚-15˚
07
24
02
,3
38