Coleman 5310 - Manual (Page 9)

Step
2
9
2-A. Assemble four Caster Brackets to the
Grill Base using three screws (TN) in
each bracket (see Fig. 2-B).
Ц Ц NOTE: The four Caster Brackets are
identical. Rotate each Caster Bracket so
three holes in each bracket align with
three holes on the Grill Base.
Ц Ц Tighten all fasteners.
2-A
2-B
Caster
Bracket
TN (x3)
Per Corner
Ц Ц Assemble four Caster Brackets to the Grill Base.
Ц Ц Assemble two Locking Casters to the front of the
Grill Base.
Ц Ц Assemble two Non-Locking Casters to the rear of the
Grill Base.
(TN)
M6 x 15mm Screw
(12) Qty.
Hardware shown actual size
Caster
Bracket (x4)
2-C
2-C. Fasten Casters tight against the Caster Brackets.
Back
Front
Locking
Caster
Locking
Caster
Non-
Locking
Casters
Front
Back