Tii 95S Series - Manual

P/N 92230301 • Rev B• 4/2/2008
Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.
Model 95S Series
Customer Bridge Module
With Adapter Bracket
Installation Note
Description
1. A Customer Bridge Module (CBM) maintains a
constant direct connection between customer
and central office service provider. The CBM
is equipped with a customer test jack (See
Figure 1). Customer can insert the RJ-11 plug
from a working telephone into this test jack to
assure a signal is received from the central
office. This is the only time the customer is
disengaged from the central office.
Features
Figure 1
Installation
Installing Customer Bridge Module into TII NID
1. Hold CBM module with wires to the left.
2. Insert the CBM module locking hinge into
Network Interface Device (NID) locking tab
(See Figure 2).
Figure 2
3. Pull back NID retainer (See Figure 2) and slip
CBM front locating fingers (See Figure 3) into
the NID locating slot.
Figure 3