Toa A-1724 - Manual (Page 8)

Phantom Power
Over 10 cm Over 10 cm
Over 10 cm
8
6. FUNCTION SWITCH SETTINGS
Set the rear-mounted Function switch as shown below.
7. SPEAKER ZONE SELECTION
Pressing the front-mounted ZONE 1 switch permits its zone indicator to light and makes broadcast through the
speakers connected to the rear-mounted Zone 1 output terminals.
Operation for ZONE 2 is performed in the same way as above.
8. INSTALLATION
Keep the unit's all sides over 10 cm away from objects that may obstruct air flow to prevent the unit's internal
temperature rise.
1 2
ON
3 4 5 6 7 8
Switch No.
Function
OFF
ON
1
MIC 6/AUX 2
MIC 6
AUX 2
2
MIC 5/AUX 1
MIC 5
AUX 1
3
MIC 6
OFF
ON
4
MIC 5
OFF
ON
5
MIC 4
OFF
ON
6
MIC 3
OFF
ON
7
MIC 2
OFF
ON
8
MIC 1
OFF
ON
5.4. External Equipment Connection to the LINE OUT and PWR AMP IN Terminals
A-1700 series
Equalizer, limiter, etc.
By connecting a signal processor such as an
equalizer or limiter between the preamplifier section
(LINE OUT) and the power amplifier section (PWR
AMP IN) of the A-1700 series, signals can be
tailored for desired sound output.
Note
Inserting an RCA plug into the PWR AMP IN
terminal disconnects the internal power amplifier
section from the preamplifier section.