Classe Audio CP-500 - Manual (Page 33)

33
hardware setup 1 Classé Delta Series Products
Two or more Classé Delta series products are required, at least one of which
must have a touchscreen display.
2 Category 5 Network Cables
Th
ese are ordinary network cables, commonly used for broadband Internet
connections. Th ey should be typical “straight through” cables not the “crossed
over” type, and the total required will be one less than the total number of
Delta series components in your system.
3 CAN-Bus Terminator
A single CAN-Bus Terminator may be required. It is inserted into the
CAN-Bus OUT connector of the last component in the CAN-Bus
daisy chain. One is included in the box with your CP-500. They are also
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
4 SSP-300 & 600 CAN-Bus Interface Box
Systems that include an SSP-600 or SSP-300 will also require an
SSP-300/600 CAN-Bus Interface Box. Th
ese are included with the products or
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm