Toa P-1812 - Manual (Page 12)

133-12-847-9B
12. SPECIFICATIONS
Power Source 220 – 230 V AC or 240 V AC, 50/60 Hz
24 V DC (M4 screw terminal*
2 )
Rated Output 120 W
Power/Current Consumption AC operation: 258 W (rated output), 94 W (EN60065)
Under 320 mA (when power switch is OFF)
24 V DC operation: 7.0 A (rated output), 2.7 A (EN60065)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion Under 2% at 1 kHz, rated power
Input LINE: 0 dB* 1 /–10 dB* 1 (switchable), 10 k
Ω, transformer balanced, RCA pin jack
Output LINE: 0 dB* 1 , 600 Ω, unbalanced, RCA pin jack
SPEAKER: High impedance (100 V line/83
Ω), M4 screw terminal*
2
Low impedance (4 – 16
Ω), M4 screw terminal*
2
Note: Both Low and High impedance terminals cannot be used at the same time.
S/N Ratio Over 100 dB (Master volume: min)
(Band Pass: 20 – 20,000 Hz) Over 97 dB (Master volume: max, INPUT LEVEL switch: 0 dB)
Over 90 dB (Master volume: max, INPUT LEVEL switch: –10 dB)
Control Input POWER REMOTE: No-voltage make contact input
Open voltage: 24 V DC
Short-circuit: under 1 mA, M3 screw terminal*
2
EMERGENCY* 3 : No-voltage make contact input
Open voltage: 24 V DC
Short-circuit: under 1 mA, M3 screw terminal*
2
Indicator 5-point LED output level meter, Power indicator LED
Operating Temperature –10°C to +40°C
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (w) x 107.7 (h) x 367 (d) mm
Weight 12.2 kg
* 1 0 dB = 1 V
* 2 Distance between barriers on the above screw terminals: 7 mm (M3 screw), 9 mm (M4 screw)
* 3 Operation when activated can be selected from the following: Turning ON the unit's power (factory-preset) or OFF.
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC power cord ................................................... 1
Terminal cover ................................................... 1
Terminal cover mounting screw (M4 x 8) ........... 2
• Optional products
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Perforated panel:
PF-013B