Toa VP-1361 Manual - Manual (Page 7)

7
13. DC Power output terminals
Supply DC power of 24 V, 500 mA to connected
external equipment.
14. Fault output terminals
Not used.
15. Program input terminals
0 dB*, 20 kΩ, balanced
These terminals are internally connected in
parallel to the Program output terminals (16).
The Program input is muted while the Priority
control input terminals (17) are shorted.
16. Program output terminals
These terminals are internally connected in
parallel to the Program input terminals (15).
Connecting these terminals to the other
amplifier's input permits the Program input
signals to be sent to such a connected amplifier.
17. Priority control input terminals
When these terminals are shorted, broadcast
through the Priority input (18) takes precedence
over the one through the Program input (15),
switching the Emergency relay terminals (11)
simultaneously.
18. Priority input terminals
0 dB*, 20 kW, balanced
These terminals are internally connected in
parallel to the Priority output terminals (20).
Broadcast through the Priority input takes
precedence over the one through the Program
input (15) while the Priority control input (17)
terminals are shorted.
19. Priority control output terminals
These terminals are internally connected in
parallel to the Priority control input terminals (17).
20. Priority output terminals
These terminals are internally connected in
parallel to the Priority input terminals (18).
Connecting these terminals to the other
amplifier's input permits the Priority input signals
to be sent to such a connected amplifier.
* 0 dB = 1V
Fuse Replacement
[To remove the fuse]
Step 1. Place the standard screwdriver blade
into the slot in the fuse carrier. Rotate
the fuse carrier counterclockwise while
pressing it firmly.
Step 2. Release pressure and extract the fuse
carrier and the fuse.
[To install the fuse]
Step 1. Insert the fuse carrier with a new fuse
into the holder body slightly by hand.
First, rotate it counterclockwise with a
standard screwdriver.
Note
When installing the fuse carrier, do not insert its
tab into the holder body's groove.
Step 2. Then, rotate the fuse carrier clockwise
to lock while pressing it firmly.
1
Rotate counterclockwise
while pressing firmly.
2
Fuse carrier comes out.
1
First, rotate
counterclockwise.
2
Rotate clockwise
while pressing firmly.
Groove