Toa IR-801AF - Manual (Page 6)

6
8. CONNECTIONS
8.1. Removable Terminal Plug Connection
Wire the removable terminal plugs for Audio output and Control output as follows:
7. SySTEM CONFIGURATION
CHARGE
FULL
ON/O
FF
IR-820SP
Infrared Wireless Speaker
Category 5 cable (straight type)
IR-801AF
Audio Interface Unit
IR-200BT-2
Ni-MH Battery for Infrared
Wireless Microphones
(pack of 2)
IR-802T
Infrared Wireless Tuner
Category 5 cable
(straight type)
IR-310M*
Infrared Wireless
Microphone
IR-310BC
Battery Charger
External equipment
like Paging system,
Recording system,
Flash light, or
Messaging system
Audio output
Control output
* Set the IR-310M’s transmitting frequency to Channel "A."
Tightens Loosens
Terminal screw
Slotted screwdriver
Shielded cable
To the removable
terminal block Solid cable and
stranded cable
Shielded cable
• Size: φ0.5 – 2 mm (AWG 24 – AWG 12)
• Width to strip:
20 mm (0.74")
7 mm (0.28")
7 mm (0.28")
Note: Avoid soldering stranded or shielded cable.
[Cable size and width to strip]