Toa D-2000 Series Read Me First - Manual (Page 8)

8
3. COMPOSITION OF THE D-2000 INSTRUCTION MANUAL
The D-2000 system Instruction manual is divided into 4 parts.
Please read the proper manual for your purpose.
This manual
(PLEASE READ THIS MANUAL FIRST)
For broadcast management and setup
For broadcasting operation
Separate Manual
(Print and CD)
Separate Manual
(CD only)
Separate Manual
(Print and CD)
Operating Instructions
For unit installation
Setting Software Instructions
Installation Manual
4. GENERAL DESCRIPTION
The D-2000 Series is a network-type Digital Mixer, allowing multiple inputs, outputs, and controls to be
installed in different locations. It is suited for use in halls, sports facilities, banquet rooms, and AV presentation
rooms, and features simple operation. Systems can be configured appropriately to suite their scales.
Built-in signal processing functions permit the unit to be used as both a digital matrix mixer and a signal
processor.
Settings are performed by a PC using the supplied setting software.
Setting contents can be stored in the internal memory as preset memory, which can be recalled without using
a PC. (The setting software is included in the supplied CD or can be downloaded from our website at
"http://www.toa-products.com/international/.")
The D-2000 Series include the D-2008SP Digital Mixing Processor Unit that is a main unit to perform signal
processing, input/output and remote control modules to be inserted into the main unit, and the D-2012C
Remote Console Unit used to remotely control the D-2008SP. Attaching the D-2012AS Console Case to the
D-2012C allows the D-2012C to be used on a desk.
5. FEATURES
• Remote control over LAN, configuring decentralized system for input/output and control sections
Configurable up to 4 D-2008SPs, 4 D-2012Cs, and 1 PC
• Function setting performed with the front-mounted keys and remote operation from a PC with the setting
software installed
• Settings available on a PC via LAN
• High-quality audio transmission over the CobraNet network
Commercially available CobraNet equipment operable by inserting the CobraNet interface module
• Simple operation by only recalling preset memories
• 32 preset memories (D-2008SP), recallable from the D-2008SP or D-2012C as well
• Most appropriate system configured depending on the system scale in conjunction with various modules and
units
• Up to 32 inputs and outputs in total for audio input/output, up to 48 contact inputs or 32 contact outputs for
control to each D-2008SP
• Feedback suppression through simple operation
• Automatic mixing function to automatically adjust input signal volume level
• Controllable by controllers such as AMX and Crestron through RS232C port or TCP/IP port
• Key lock function to avoid mistaken operation of front panel keys and knobs
• Easy remote control for volume adjustment and preset memory recall with the use of optional remote control
module
Notes
• CobraNet is a trademark of Cirrus Logic, Inc.
• AMX is a trademark of AMX Corporation.
• Crestron is a trademark of Crestron Electronics, Inc.