Toa MP-1216 - Manual (Page 7)

7
5. CONNECTION EXAMPLE
E C
LINE SP LINE SP LINE SP LINE SP
4 3 2 1
H – + E C H – + E C H – + E C H – +
Speaker
Amplifier with high-impedance (100 V)
or low impedance (8 Ω) output
Mixer or preamplifier
Speaker line
7. DIMENSIONAL DIAGRAM
Unit: mm (inch)
1000 SERIES MULTI CHANNEL MONITOR MP-1216
466 (18.35)
4 - 7 x 10.5 (4 - 0.28 x 0.41)
482.6 (19)
76.2
(3)
280 (11.02)
312.7 (12.31)
88.4
(3.48)
6. INSTALLATION PRECAUTIONS
• Keep the power amplifier's input cables as far away as possible from its output cables. Also, avoid routing
high-impedance speaker cables near the input terminals of other channels. Failure to observe these
instructions may cause oscillation or crosstalk.
• When mounting the unit next above power amplifiers, mount a 1U blank panel between them.