Toa BS-1034EN - Manual (Page 2)

2
• Do not use anti-rust lubricant. If it contacts resin or
rubber parts, they could deteriorate and cause the
speaker to fall, possibly resulting in personal injury.
• Avoid installing the speaker near seaside or in
locations exposed to corrosive gas. The speaker or
its parts may be subject to corrosion, which might
cause it to fall or result in personal injury.
• Do not install the speaker in indoor swimming pools
or such locations where liquid chemicals are used.
The parts deteriorate if corroded, causing the
speaker to fall, which could result in personal
injury.
When the Unit is in Use
• If any of the following irregularities occurs,
immediately switch off the amplifier's power, and
inform the shop from where the speaker was
purchased. Further using the speaker may result in
fire or electric shock.
· If you detect smoke or a strange smell coming
from the speaker
· If water or any metallic object gets into the
speaker
· If the speaker falls, or the speaker case breaks
• To prevent a fire or electric shock, never open nor
remove the speaker case. Refer all servicing to
your nearest TOA dealer.
When Installing the Unit
• Avoid touching the speaker's sharp metal edge to
prevent injury.
• To avoid electric shocks, be sure to switch off the
amplifier's power when connecting speakers.
When the Unit is in Use
• Do not operate the speaker for an extended period
of time with the sound distorting. Doing so may
cause the speaker to heat, resulting in a fire.
• Do not stand or sit on, nor hang down from the
speaker as this may cause it to fall down or drop,
resulting in personal injury and/or property
damage.
• Have the speaker checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the speaker or the
mounts that could cause it to fall, possibly causing
personal injury. Do not stand or sit on, nor hang
down from the speaker as this may cause it to fall
down or drop, resulting in personal injury and/or
property damage.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
2. GENERAL DESCRIPTION AND FEATURES
The BS-1034EN is certified according to the European Standard EN 54-24: 2008 and the International
Standard ISO 7240-24: 2010.
• BS-1034EN of which cabinet is made of HIPS resin, can be installed in a vertical or horizontal orientation.
• Thin type wall mount speaker with 5" cone speaker unit
• Two-way speaker system employing a balanced dome tweeter and elliptical horn for high-frequency sound
reproduction in combination with a 5" cone speaker unit ensures high-quality sound.
• The speaker's smoothly curved surface in combination with its straight lines permits it to blend in with
virtually all modern buildings.
• Equipped with a speaker receptacle, providing speaker cable connection and installation ease.
• Equipped with a lock mechanism, preventing the speaker from being detached easily after installation.
• In-wall wiring, exposed wiring, or bridge wiring available for speaker cable connection
• The input power (impedance) can be easily changed by the rear-mounted rotary switch.
TERMINAL
(HOT)
N
(COM)
C R
HOT
COM
HOT (N)
COM (C)
Speaker receptacle
(Rear)
Terminal block
with thermal fuse
To the speaker
From the
amplifier
To other
speaker
HOT
COM
3. CONNECTION
Connect the speaker cable to the supplied
speaker receptacle.
Notes
• Use the supplied terminal block only when
wirings are concealed in the wall or a terminal
box is installed for wirings.
• The supplied terminal block is equipped with a
thermal fuse and fiberglass tube. For safety
purposes, connect the terminal block between
the speaker cable and the speaker receptacle
as shown at right.