Toa TS-905 User Manual

Infrared transmitter/receiver, Ts-905, Instruction manual

Advertising
background image

URL: http://www.toa.jp/

Traceability Information for Europe (EMC directive 2004/108/EC)

Manufacturer:

TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan

Authorized representative:

TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany

INFRARED TRANSMITTER/RECEIVER

INSTRUCTION MANUAL

TS-905

Thank you for purchasing TOA's Infrared Transmitter/Receiver.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

1. GENERAL DESCRIPTION

The TS-905 Infrared Transmitter/Receiver is designed for the TOA Infrared Conference Systems.
It is connected to the Central unit, and permits communications between the Central unit and
Chairman/Delegate units in the systems. Communications between the TS-905 and
Chairman/Delegate units are performed by means of infrared signals.
For more information, refer to the instruction manual supplied with the Central unit.

2. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Power Source

24 V DC (supplied from the optional TS-800 or TS-900)

Current Consumption

Max. 150 mA

Wavelength

870 nm (AM: Brightness modulation)

Modulation Method

Frequency modulation

Carrier Frequency

Transmission: Audio channel 1:

7.35 MHz

Audio channel 2:

8.10 MHz

Audio channel 3:

8.55 MHz

Audio channel 4:

9.15 MHz

Control channel:

6.45 MHz

Reception:

Base language channel:

1.95 MHz

Translation language channel: 2.25 MHz

Acceptance Angle

Vertical: 150° (75° + 75°), Horizontal: 360°

Emission Angle

Vertical: 150° (75° + 75°), Horizontal: 360°

Communication Area

Approx. 6 – 7 m in radius from the point underneath the unit
(ceiling height: 2.5 – 4.5 m)

Connection Terminal

BNC jack

LED Indicator

Power

Operating Temperature

0°C to 40°C

Finish

Dome: PC resin, visible light cut filter
Base: ABS resin, black

Dimensions

ø120 x 71.3 (h) mm

Weight

230 g (unit only)

Infrared Emitter/Detector

• Accessories
Mounting bracket ........................................ 1
Stand mounting bracket .............................. 1
Screw M3 x 6 .............................................. 3

W5/16 – W5/8 thread adapter
(except for CE version) ............................... 1

This is a class A product.
In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.

Advertising