Toa NX-100S Installation - Manual (Page 40)

3-14
Chapter 3: SYSTEM SETTINGS (NX-100 SETUP PROGRAM)
6.2. Menu
6.2.1. File
Save to file (Ctrl+S): Overwrites and saves the system setting file.
Reopen file (Ctrl+O): Rereads the saved system setting file.
Log file download:
Saves the log of all NX-100 and NX-100S operations programmed into the system.
Exit: Exits the program.
6.2.2. Edit
Add
NX-100:Adds the selected NX-100 to the list (edit screen).
NX-100S:Adds the selected NX-100S to the list (edit screen).
Delete: Deletes the selected NX-100 or NX-100S from the list (edit screen).
Clear:
Deletes all NX-100 and NX-100S units from the list (edit screen).
6.2.3. Setting
Upload (Ctrl+U): Writes the settings currently being edited into the NX-100 and NX-100S.
Download (Ctrl+D): Downloads the settings from the NX-100 and NX-100S, and displays them on the edit
screen. (Not saved.)
Firmware update: Updates the NX-100 and NX-100S firmware.
6.2.4. Help
Help: Displays help contents.
Version data: Verifies the version number of the NX-100 Setup program.