Specifications, Software specifications, Communication specifications – Toa D-901 KR User Manual
Page 78: Setting items and setting ranges, Signal processing box
78
20. SPECIFICATIONS
20.1. Software Specifications
Operating System: Microsoft Windows 98 SE/Me/2000 and Windows XP
Preset Memory:
16 memories
20.2. Communication Specifications
Communication Method: RS-232C
Transmission Rate:
115200 bps (38400 bps, 19200 bps, 9600 bps)
Data Bit:
8 bits
Stop Bit:
1 bit
Parity: Non-parity
Connection Cable:
RS-232C straight cable
20.3. Setting Items and Setting Ranges
Note: Underlined parameters are factory-preset.
20.3.1. Signal processing box
[Input and Output/Trim Settings]
Setting Item
Setting Range
Input Channel Gain
–
∞ to +10 dB
Input Trim Gain
–15 to +15 dB (0 dB), 0.1 dB steps
Input Trim Polarity
NORMAL, INVERSE
Input Channel Group Trim Gain
–
∞ to +10 dB, 0.1 dB steps
Output Channel Gain
–
∞ to +10 dB (0 dB)
Output Channel Group Trim Gain
–
∞ to +10 dB, 0.1 dB steps
[High-Pass Filter Settings]
Setting Item
Setting Range
Cutoff Frequency
20 Hz – 20 kHz (60 Hz), 1/24 octave steps
Slope
12 dB/oct
Q
0.500 – 2.563 (0.707) (51 points)
ON/OFF
ON, OFF
[Equalizer Settings]
Setting Item
Setting Range
Gain
–15 to +15 dB (0 dB), 0.1 dB steps
Center Frequency
20 Hz – 20 kHz (Low: 630 Hz, High: 1.25 kHz), 1/24 octave steps
Q
0.267 – 69.249 (4.318) (96 points)
ON/OFF
ON, OFF
[Compressor/Auto-Leveler Mode Settings]
Setting Item
Setting Range
Compressor/Auto-Leveler Mode
COMP, LEVELER