Toa HY-CN1W-WP - Manual

TOA's HY-CN1 series brackets are used to join 2 HX-5 series speaker systems, typically for the purpose of achieving
better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-range
sound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a
high level of background noise.
HY-CN1B, HY-CN1W,
HY-CN1B-WP, HY-CN1W-WP SPEAKER EXTENSION BRACKETS
INSTALLATION MANUAL
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
• Be sure to follow all the precautionary instructions in this
section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future
reference.
• Install the unit only in a location that can structurally
support the weight of the unit and the speaker. Doing
otherwise may result in the speaker falling down and
causing personal injury and/or property damage.
• (HY-CN1B and HY-CN1W only)
Since the unit is designed for indoor use, do not install it
outdoors. If installed outdoors, the aging of parts causes
the unit to fall off, resulting in personal injury.
• Do not use other methods than specified to mount the
unit. Extreme force is applied to the unit and the speaker
could fall off, possibly resulting in personal injuries.
• Tighten each nut and bolt securely. Ensure that the unit
has no loose joints after installation to prevent accidents
that could result in personal injury.
• Use the specified speaker in combination. Doing
otherwise may cause the speaker to fall off, resulting in
personal injury.
• Do not mount the unit in locations exposed to constant
vibration. The unit can be damaged by excessive
vibration, potentially causing the speaker to fall, which
could result in personal injury.
• Avoid installing the speaker in locations close to the
seashore or in indoor swimming facilities that are not well
ventilated. In such locations the unit may be vulnerable to
corrosion, eventually allowing the speaker to fall resulting
in personal injury.
2. PRECAUTIONS WHEN INSTALLING
THE HY-CN1B-WP AND HY-CN1W-WP
Only the HY-CN1B-WP and HY-CN1W-WP can be
installed outdoors.
• Only the HX-5B-WP and HX-5W-WP speaker systems
can be installed outdoors.
• Install the speaker so that all speaker modules face
downward from the horizontal axis.
Doing otherwise could adversely affect the speaker's
weather resistance and possibly lead to malfunction or
failure.
3. FINISHED ASSEMBLY DIAGRAM
Unit: mm (inches)
Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious personal
injury.
WARNING
Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor personal injury,
and/or property damage.
CAUTION
• Avoid touching the unit's sharp metal edge to prevent
injury.
• Have the unit checked periodically by the shop from
where it was purchased. Failure to do so may result in
corrosion or damage to the unit that could cause the unit
to fall, possibly causing personal injury.
Front bar bracket
(component of HY-CN1 series)
Rear bar bracket
(component of HY-CN1 series)
HX-5series
HX-5 series
(When set to t
he 60
° mode) (When set to t
he 15
° mode)
1090 (42
29
/ 32
)
–
1104 (43
15
/ 32
)