Vermont Casting VC0620P - Manual (Page 19)

19
Installing an L.P. Gas Cylinder
Obtain a filled L.P. gas cylinder. Read and
follow all directions on the cylinder and fuel
hose safety tags.
1.
2.
3.
4.
Working from behind the grill, set the
cylinder into the large round opening in
the grill base.
Position the cylinder-retainer wire around
the cylinder collar as shown.
Insert the right end of the wire into the
small opening in the base.
Flex the left side so that it fits into the
opposite opening on the left side of the
base.
1 1
2 2
3 3
4 4
Items Needed:
L.P. Gas Cylinder
(1 FILLED)
grease drip
pan (1)
LOCATE THESE PARTS:
cylinder retainer
wire (1)
(Back side, under grill bottom)
Connect the L.P. cylinder to the
grill outdoors only.
WARNING:
NOTE: Some
L.P. grill models
DO NOT include
an L.P. gas
cylinder