Toa ST-34B - Manual (Page 2)

Bracket with a speaker unloaded
Speaker mounting screw
Plain washer
101 – 153 mm Bracket (supplied)
Speaker
Bracket fixing screw
Plain washer for M8 (supplied)
Speaker mounting screw M8 (supplied)
Note
To prevent loss, store the speaker mounting screws
and plain washers as shown above when not used.
Note
Spread the legs until the stays are made level to the ground.
Note
Ensure that both screws are firmly tightened.
WARNING
Never pull the safety pin when the knob A is loose.
The mounted speaker may fall, causing personal injury.
1
3
4
6
5
2
Safety pin
Stay
Leg
Knob B
Knob A
Outer pipe
Inner pipe
Less than 35 kg (static load)
101 – 153 mm
Inner pipe, outer pipe, leg: Aluminum, black, mat paint
Bracket:
Rolled steel plate, black, paint
ø1290 (open legs) x 1373 – 1968 (height with bracket mounted) mm
4.2 kg
Permissible Speaker Load
Speaker Mounting Pitch
Finish
Dimensions
Weight
3. SPECIFICATIONS
Bracket ............................................................ 1
Speaker mounting screw M8 .......................... 2
Plain washer for M8 ........................................ 2
• Accessories
Note: The design and specifications are subject to change without notice for improvement.
133-05-454-5A
URL: http://www.toa.jp/