Toa YP-M301 - Manual

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
YP-M301 HEADSET MICROPHONE
INSTRUCTION MANUAL
Head pad
Headband
Slide arm
Microphone boom
Microphone Windscreen
Angle adjustable (360 °)
3.5 mm-diameter monaural plug
Maximum 60 mm
133-05-309-0A
Type Electret condenser type
Directivity Unidirectional
Sensitivity –41 dB (0 dB=1 V/Pa,
1 kHz, load: 2 k
Ω)
Maximum Input Sound 117 dB SPL
Pressure
Terminal ø3.5 mm monaural plug
Cord Length 1.2 m
Finish Headband: ABS resin,
black
Weight 45 g (cable included)
4. SPECIFICATIONS 1. GENERAL DESCRIPTION
The YP-M301 is a headset microphone designed to
be exclusively used with an optional WM-1100
Portable Transmitter.
3. HOW TO USE
• Put on the headset and adjust the slide arms so
that the head pads are positioned just over the
ears.
• Adjust a microphone boom, and position the
microphone (windscreen attached) at the mouth.
• Keep the microphone 3 – 5 cm away from the
mouth when using.
• Speaking loud or positioning the microphone too
close to the mouth could muffle sounds and make
them inaudible.
• The headset is not recommended for use in
aerobics or other vigorous performance
applications.
• Use the supplied case when storing the unit.
2. NOMENCLATURE
Note: The design and specifications are subject to
change without notice for improvement.
Storage case .............................................. 1
Windscreen (black) .................................... 2
• Accessory