Toa C-BC511U-S - Manual (Page 3)

2. GENERAL DESCRIPTION
The mounting bracket is designed to be used for mounting the Combination Camera (C-CC514, C-CC564 and
C-CC574) and/or Network Combination Dome Camera (N-CC2564) in a ceiling. It can reduce the camera's
exposed area and is ideal for mounting cameras to gypsum board ceilings or other weak ceiling panel
materials in which mounting screws cannot be securely inserted. Two types of mounting bracket are available:
the C-BC511U (transparent dome version) and C-BC511U-S (smoked dome version).
Since camera orientation cannot be seen from outside the enclosure when the C-BC511U-S is used, it is more
effective in enhancing the effect of surveillance.
3. HANDLING PRECAUTIONS
• Do not install the unit in locations exposed to constant vibration. Since the unit is not designed for vehicle or
ship use, do not install it in a vehicle or ship.
• To prevent the unit falls off, be sure to hang the safety wire first when installing the unit.
• Do not give the unit a great shocks or vibration, as the unit may fall off and cause damage.
• The Combination Camera is solely designed for suspended installation. The dome of the mounting bracket
must be mounted facing down and perpendicular to a horizontal ceiling surface. Take special care not to
install the dome at a tilted angle.
• Fix the camera to the bracket using the designated mounting screws, and ensure that they are securely
mounted without any play.
• Use the unit whenever the space between suspended ceiling panel and upper ceiling exceeds a height of
250 mm (9.8 inch).
• The ceiling panel to which the unit will be mounted must be no more than 40 mm (1.6 inch) in thickness.