Toa C-CC354A PAL - Manual (Page 11)

Using the key and the key, move the flashing [ ]
cursor to the desired speed, and press the SET key to
register the setting. The display will then return to the
initial screen.
Notes
• When "AUTO" (auto iris) is selected on the lens
selection screen, the indication of AES is not
displayed.
• When "MANUAL" (manual iris) is selected on the lens
selection screen, the shutter speed is set for AES.
11
Shutter Speed/Flickering-Reduction Operation Setting
•
Shutter speed setting screen
NTSC: You can set the shutter speed to NORMAL (1/60), 1/100 (flickering-reduction for), 1/125,
1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 or AES.
PAL : You can set the shutter speed to NORMAL (1/50), 1/120 (flickering-reduction for), 1/125,
1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 or AES.
Wide Dynamic Setting
This function adjusts the image so that an object does not appear too dark or the background too bright, in
order to make both the dark and bright sections of the object visible under backlight conditions.
•
Wide Dynamic Setting Screen
1. Move the cursor [ ] using the and keys to
select OFF, NORMAL or MANUAL.
• NORMAL: The Wide Dynamic function is enabled
only when a camera detects backlighting.
• MANUAL: Permits more precise settings to be
made, depending on installation conditions.
Note
When the Backlight Compensation switch is set to
the OFF position, the [
] cursor is set to OFF.
2. Press the [SET] key to confirm the selection.
• OFF or NORMAL: The display returns to the initial
screen.
• MANUAL: The Wide Dynamic Area Setting Screen is displayed. (Refer to p. 12.)