Toa C-CH210FH - Manual (Page 19)

19
C-CH210FH
Wiper blade
Notched hole
Holder
Wiper blade
Holder
To mount the wiper blade,
align the wiper blade slots with
the holder as shown in the figure.
10. WIPER BLADE REPLACEMENT (C-CH210FH ONLY)
Because the wiper blade will wear out over years of use, replace it periodically.
1. Pull the worn wiper blade out of the holder’s notched hole.
2. Insert a new wiper blade (service part code 102-15-420-30) into the holder’s notched hole to mount it.
Note
Only use the wiper as needed on rainy days, since dry operation can cause the blade to wear out quickly and
stick to the front glass.