Safety precautions – Traxxas 74076-1 User Manual

Page 4

Advertising
background image

4 • TRAXXAS RALLY

This model is not intended
for use by children under
14 years of age without the
supervision of a responsible
and knowledgeable adult.
Gearing and battery choice
(see LiPo Batteries, right)

effect the skill level of the
model. See chart below.

All instructions and
precautions outlined in this
manual should be strictly
followed to ensure safe
operation of your model.

SAFETY PRECAUTIONS

1

See the charts on pages 23-24
for more information.

Gearing: Stock
Battery: Included NiMH
Voltage: 8.4V
mAh: 3000mAh

Gearing: Included Optional
Battery: Included NiMH
Voltage: 8.4V
mAh: 3000mAh

Gearing: Included Optional
Battery: 2S LiPo
Voltage: 7.4V
mAh: 4000m+ mAh

Gearing: Included Optional
Battery: 3S LiPo
Voltage: 11.1V
mAh: 5000m+ mAh

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

• If a battery gets hot to the touch during the charging process

(temperature greater than 140°F / 60°C), disconnect the battery fromthe
charger and discontinue charging immediately.

• Always store battery packs safely out of the reach of children and pets.
• Do not short-circuit the battery pack. This may cause burns and severe

damage to the battery pack and create the risk of fire.

• Do not expose the charger to water or moisture.
• Do not disassemble the charger.
• Use the supplied charger to charge the included battery. See “Charging the

Battery Pack” on page 11.

• Never leave batteries to charge unattended.
• Remove the battery from the model while charging.
• Always unplug the battery from the electronic speed control when the

model is not in use and when it is being stored or transported.

• Allow the battery pack to cool off between runs (before charging).
• Children should have responsible adult supervision when charging and

handling batteries.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, or a

damaged connector.

• Do not short-circuit the battery pack. This may cause burns and severe

damage to the battery pack.

• Do not burn or puncture the batteries. Toxic materials could be released.

If eye or skin contact occurs, flush with water.

• Store the battery pack in a dry location, away from heat sources and

direct sunlight.

• Nickel Metal Hydride batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery
Traxxas strongly encourages you to recycle your Power Cell NiMH
battery when it has reached the end of its useful life.

Do not throw your

battery in the trash.

All Power Cell NiMH battery packs display the RBRC

(Rechargeable Battery Recycling Corporation) icon, indicating they are
recyclable. To find a recycling center near you, ask your local hobby dealer
or visit www.call2recycle.org.

LiPo Batteries
Lithium Polymer (LiPo) batteries are becoming popular for use in R/C
models due to their compact size, high energy density, and high-current
output. However, these types of batteries require special care and handling
procedures for long life and safe operation.

WARNING: LiPo batteries

are intended only for advanced users that are educated on the risks
associated with LiPo battery use. Traxxas does not recommend that
anyone under the age of 14 use or handle LiPo battery packs without the
supervision of a knowledgeable and responsible adult.

Your model is able to use LiPo batteries with nominal voltage not to exceed
11.1 volts (3S packs). LiPo batteries have a minimum safe discharge voltage
threshold that should not be exceeded. The Velineon VXL-3s electronic
speed control is equipped with built-in Low-Voltage Detection that alerts
the driver when LiPo batteries have reached their minimum voltage
(discharge) threshold.

It is the driver’s responsibility to stop immediately

to prevent the battery pack from being discharged below its safe
minimum threshold.

Low-Voltage Detection on the speed control is just one part of a
comprehensive plan for safe LiPo battery use.

It is critical for you, the user,

to follow all other instructions supplied by the battery manufacturer
and the charger manufacturer for proper charging, use, and storage
of LiPo batteries. Do not attempt to charge LiPo batteries with the
Traxxas charger included in this package. Make sure you understand
how to use your LiPo batteries.

Be aware that Traxxas shall not be liable

for any special, indirect, incidental, or consequential damages arising out
of the installation and/or use of LiPo batteries in Traxxas models. If you
have questions about LiPo battery usage, please consult with your local
hobby dealer or contact the battery manufacturer.
As a reminder, all
batteries should be recycled at the end of their useful life.

DO NOT ATTEMPT TO CHARGE LIPO BATTERIES OR ANY OTHER TYPE OF
BATTERY WITH THE INCLUDED TRAXXAS CHARGER.

Speed Control

• Disconnect the Batteries: Always disconnect the battery pack from

the speed control when not in use.

• Transmitter on First: Switch on your transmitter first before switching on

the speed control to prevent runaways and erratic performance.

• Don’t Get Burned: The heat sink can get extremely hot, so be careful not

to touch it until it is cool. Supply adequate airflow for cooling.

• Use Stock Connectors: If you decide to change the battery or motor

connectors, only change one battery or motor connector at a time. This
will prevent damage from accidentally mis-wiring the speed control.
Please note that modified speed controls can be subject to a rewiring fee
when returned for service. Removing the battery connector on the speed
control or using the same-gender connectors on the speed control will
void the product’s warranty.

• Insulate the Wires: Always insulate exposed or damaged wiring with heat

shrink tubing to prevent short circuits

Advertising