Traxxas 6570 DTS-1 - Manual (Page 12)

12 • DTS-1 TIMING SYSTEM
Selecting the Staging and Tree Modes
The DTS-1 makes it easy to select from three Staging Modes and four Tree
Modes. Any Staging Mode can be used with any Tree Mode.
First, select a Staging Mode:
The Staging Mode menu controls how the competing vehicles will position
themselves for the start of the race.
1. Press and hold the MENU button until two beeps are heard.
Release the button.
2. Press the MENU button to alternate between the two menu items.
The top left yellow LED lights when Staging is selected; the second
yellow LED lights when Tree is selected. Stop when the top LED is lit to
select Staging Mode.
3. Press the OPTION button to select the Staging Mode you wish to use.
The LEDs on the right side of the tree indicate which option is selected.
Each time you press the OPTION button, the next LED will light. Option
explanations are on page 13; stop on the option you wish to select.
4. Press and release the SET button to confirm your Menu and Option
selections. The console will emit a “success” tone to confirm the settings
have been accepted.
Tip: Hold the SET button for 4 seconds to exit the menu without saving the
selected settings.
Next, select a Tree Mode:
The Tree Mode menu controls how the tree lights will “drop” to start the race.
1. Press and hold the MENU button until two beeps are heard.
Release the button.
2. Press the MENU button to alternate between the two menu options.
The top left yellow LED lights when Staging is selected; the second
yellow LED lights when Tree is selected. Stop when the second LED is lit
to select Tree Mode.
3. Press the OPTION button to select the Tree Mode you wish to use. The
LEDs on the right side of the tree indicate which option is selected.
Each time you press the OPTION button, the next LED will light. Option
explanations are on page 13; stop on the option you wish to choose.
4. Press and release the SET button to confirm your Menu and Option
selections. The console will emit a “success” tone to confirm the settings
have been accepted.
Tip: Hold the SET button for 4 seconds to exit back to Step 1 without saving the
selected settings.
Staging Mode
Tree Mode
Pro Staging
EZ-Staging
Hand Staging
Pro Tree
Sportsman Tree
Sportsman Tree Practice
Pro Tree Practice
SYSTEM PROGRAMMING