Trending Accessibility Multi-Piece (4836, 6033, 6036, 6048, 6060) - Manual

READ ALL INSTRUCTIONS BEFORE INSTALLATION
PLANNING YOUR INSTALLATION
MULTI-PIECE SECTIONAL PRODUCT
INSTALLATION INSTRUCTIONS
Avoid exposure to weather. Product cartons are not waterproof. Cartons exposed to rain or snow may
result in accumulated water penetrating the back laminates of the shower and soak the glassed in
reinforcement supports causing bulges in the gelcoat surface. 1.
Most handling damage is the result of impact blows to the back of the fiberglass units. 2.
Never drag sectional parts of this fiberglass product on any surface. Always carry the parts or use a two
wheel dolly. 3.
Never drop these fiberglass parts from any height, not even an inch or stress cracks are likely to occur. 4.
Placing objects inside the unit can cause scratches or nicks to the finished surface.
Do not use the shower as a trash receptical! Always place a drop cloth or cardboard on the floor when
working inside the shower. 5.
Never clean fiberglass gelcoat surface with metal tools of any kind, including razor blades. 6.
TOOLS NEEDED:
Nails
1/8” Drill Bit
Hammer
Drill With Phillips Screw Bit
1/2” Notched Trowel
Spatula
Grease Pencil (China Marker)
Auger Mixing Tool For Drill
Caulking Gun
4 Foot Level
2 Foot Level
50+ 1 1/4” Wood or Flat Head Screws
Solid Wood Flooring Adhesive
(2-One Gallon Buckets Per Shower)
(For Mixing Bedding Compound And Water Test Around Drain)
2-Gallons Of Water
1-Tube White Bathroom Caulking
2-Tubes 100% Clear Silicone Caulking
3 - 8 Foot 2 x 4’s
1 - 8 Inch Long 2 x 4
1 - 24 Inch Long 2 x 4
2 - Large Wiping Cloths
Self-Caulking Shower Drain Fitting
MATERIALS NEEDED:
1
856-488-9535 www.TrendingAccessibility.com