Trending Accessibility LIBERTY CAREGIVER DOORS - Manual (Page 5)

www.TrendingAccessibility.com | 856-488-9535
Installation - Liberty Caregiver Doors
5
13
(a) Clip the two plastic locating plates in place.
(b) Align the spirit level bubble.
14
Mark the two alignment points, repeat for the
lower fasterner. DO NOT DRILL MARKINGS
15
Unclip the marking plate and align with the
previously marked points. Mark the center hole
for drilling. DO NOT DRILL OUTER POINTS
16
Using a suitable drill bit, drill the upper and
lower marked center points.
17
Using appropriate hardware, screw the wall channel
into position, ensuring the channel remains vertical.
Note: Screw plugs may be required
18
Insert the door into the wall compensator.
(a) (b)