Triner Scale AWB40-5K - Manual (Page 6)

Weigh Bars
Leveling Feet
The WB-40 weigh bars feature adjustable feet at each
end of the bar. This enables side to side and front to
back adjustment when setting up the system.
NOTE
Be sure that the feet are not screwed all the way
into the bar, as this will result in inaccurate
weighing.
Protective Cover Caps
When the cables are disconnected from the weigh
bars, be sure to replace the protective cover caps to
cover the weigh bar cable sockets.
Cables
Each weigh bar is equipped with a 20’ cable for
connecting to the TS-700 WB digital indicator.
The cables have quick-connect plugs for connecting
to the weigh bars and digital indicator.
CAUTION
The following situations can result in damage to
the cables, connections, and/or digital indicator:
• Animals stepping on or pulling cables
• Animals biting cables
• Workers stepping on or pulling cables
• Equipment dropping on cables.
Arrange the cables in a way as to avoid these
types of situations and resulting damages to the
system.
Keypad Keys and Functions (cont’d)
Gross
Displays Gross Weight When Tare Weight Has Been
Added
Press to momentarily display gross weight.
Tare
Enters a Tare Weight
To display the net weight in a container, place the
empty container on the scale, and press the Tare key.
Place the container and contents on the scale. Net
weight will display.
Zero
Zeros Out the Indicated Weight
Press to return the scale to no (zero) indicated weight.
Print
- Prints Ticket (requires optional printer)
- Transmits Ticket Data to PC ( requires optional
software & interface cable)
Press to print or transmit weigh ticket data.
Hot-dip Galvanized
Carbon Steel Tubing
Height-adjustable Feet
With Mounting Holes
Sealed Polyurethane
End Caps
Detachable 20 ft. Cables
Connectors
With Attached
Protective Cover Caps
Internally Mounted
Nuts For Bolting To
Brackets
USER’S GUIDE
EZ-Bar™
Livestock Weighing System
2