Triner Scale iForks Pt1 - Manual (Page 20)

OWNERS MANUAL – i Forks 20
Key functions
Each key has 2 operational and one entry function
Standard function
Key Special function Value entering
(Short key press) (long key press) function (entry mode)
zero setting
code entry
enter
automatic tare
pre-set tare
decrease the value
of the digit flashing
print weight and add to
check subtotal and print total
the total
increase the value of
the digit flashing
sampling a piece weight
enter a piece weight
shift to the next digit
on the left
On switch
Off switch
and change to lb and kg
clear entry
Important
Operation of a key is not accepted unless the weighing system is stable (and the “load stable” pointer
lights up). This means that the indicator only executes commands with a stable load.
For a detailed description of the functions
CODE ENTRY , PIECE COUNT and RELAY check our operational
manual Indicator 4100 at www.ravas.com
ID CODE
PT
TOTAL
PCS
KG/LB
CLR