Tuffy Security 198 - Manual

Tuffy Security Products, www.tuffyproducts.com , 970-564-1762 Page 1 of 2 - 12/01/2009
Command Center Modular Console Line
ITEM # - 198 Drink Holder with Storage Tray
See TuffyProducts.com for all vehicle applications and related products
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 – (1) 198 Drink Holder with Storage Tray
SHIPPING PACKAGE CHECKLIST
#5.3 - (2) 10-32X1/2 HEX HEAD SCREW
#5.2 - (2) #10 FLAT WASHERS #5.1 - (2) #10 NYLOCK NUTS
TOOLS NEEDED
•
5/16” and 3/8” sockets and ratchet or nut driver
•
May need additional tools if installing other Command Center components or accessories
ASSEMBLY INSTRUCTIONS:
ATTENTION:
•
THIS CONSOLE WAS DESIGNED FOR A STOCK OEM VEHICLE OR OEM FLEET VEHICLE, ANY
MODIFICATIONS SUCH AS ADDITIONAL EQUIPMENT OR OPTIONAL EQUIPMENT OR CONFIGURATIONS
MAY AFFECT THE FIT. CALL (970) 564-1762 WITH ANY QUESTIONS.
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
Note: The 198 Drink Holder is designed to be installed to other Command Center Console components. See
www.tuffyproducts.com for more information on the complete Command Center Console line.
1. IMPORTANT! Make sure the vehicle is parked on a flat surface, placed in park, and the emergency brake is activated.
2. The 198 Drink Holder is designed to be bolted to a 191 Command Center Console and/or a 194 Console Lock Box. See Fig.
2 and Fig. 3 for a view of a typical installation.