Tuffy Security 286-BTL - Manual

Page 1 of 1 – 01/24/2012 – Rev 2/28/13
INSTALLATION INSTRUCTIONS
#282-BTL-01 OR #286-BTL-01
For use with OEM or aftermarket soft-top tailgate bar
Call (970) 564-1762 for Technical Support
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 Lever (Qty 2)
TOOLS NEEDED

None
ATTENTION:

THIS ENCLOSURE WAS DESIGNED FOR A STOCK OEM VEHICLE WITH A SOFTTOP.
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
1. The #1 Lever is supplied with double sided tape applied to the lever side. Peel the adhesive backing off of the tape.
Install the #1 Lever to the #2 Softtop tailgate bar with the lever side toward the bar. The handle side of the #1 Lever
will be facing toward the front of the vehicle. Rotate the #1 Lever towards the #2 bar and press firmly to ensure tape
adheres. To operate, grip the Lever Handle and twist upward to un-clip bar clips.
2. OPTIONAL: If fastening with screws, hold the #1 Lever to the #2 bar, mark and drill for the mounting holes and fasten
with #8 Flat head Phillips screws with nuts (not supplied). Install the screws from inside the #2 bar clips.
FIGURE 1
Call (970)564-1762 for Technical Support